PSC Gen IV Super Flow Power Steering Reservoir

For applications without hydroboost brakes.

PSC reservoirs are manufactured out of 6061T6 aluminum and are TIG welded for strength and reliability.

An internal 35 micron filter cartridge virtually eliminates fluid cavitation which is the leading cause of excessive pump noise and fluid overheating and helps prevent loss of pressure in the system and catastrophic damage to the pump.

A functional and smart looking product, a PSC Remote Reservoir is equipped with an AUX Port incase a hydroboost system is added at a later time, a universal mounting clamp, an oversized threaded cap that is vented and o-ring sealed. The cap allows for easy filling and fluid inspection. An optional base mounting bracket is available for tight engine compartments.

-6AN (3/8") Return, -12AN (3/4") Feed is recommended for Cylinder Assist

-8AN (1/2") Return, -12AN (3/4") Feed is recommended for Full Hydraulic

PSC recommends SWEPCO 715 Power Steering Fluid in all PSC Systems

Note: Images are for reference only. Actual product may vary slightly from images shown.

Note: It is recommended to mount the reservoir so the fluid level remains above the level of the pump and that the hose the supplies fluid back to the pump from the reservoir not exceed 16”. If the pump supply hose exceeds the 16” you could possibly create a vacuum situation that will create aeration in the pump. This will results in a noisy, whining pump that will eventually fail.